on this page

Square Deal B

XL 650 Reloader

RL 550B Reloader

SUPER 1050 Auto-indexing Reloader

List of Optional Accessories

Case Gages

Dillon Case lube

Rapid Polish 290

Vibratory Case Cleaners

Separators

Range Bag with Pistol Pouch

Ammo Bag

Uncle Mike's Kydex Hip Holster

Electronic Hearing Protectors

Belt Clip

Kinetic Bullet Puller

Standard Die Set

Eliminator Scale

Electronic Scale

Kelly from Alberta:

Stephen from BC:

to order

Call 604.889.3822
(8AM-8PM PST)

or send email to DOC@mdgardner.com

payment options

What Does a Press Cost?

Review this PDF of a typical invoice to get an idea of what your Dillon press will cost you (as of January 2008).

You can delete things you feel you don't need/want and get a good idea of what your bottom line will be.

As always, you should call me with questions at 604.889.3822 between 8AM and 8PM Pacific Time.

Do You Need Polishing Media?

I sell crushed corn cob,
four pounds for $5

Square Deal B Auto-Indexing Reloader

* Automatic Indexing
* Auto Powder / Priming Systems
* Available in 14 Handgun calibers
* Loading Rate: 400-500 Rounds per Hour
* Comes Complete With Loading Dies
* Factory Adjusted, Ready-to-Use
* Lifetime "No-B.S." Warranty

Dillon's Square Deal B was designed to produce large amounts of ammunition in the least possible time for just a little bit of money. At 400 to 500 rounds per hour, you can produce enough ammunition for several practice sessions in just a few hours.

The Square Deal B comes to you complete with a factory adjusted carbide die set, ready to load the pistol calibers of your choice -- all you need to do is determine the powder charge you want, set the automatic powder measure accordingly and select the bullet seating depth.

Whether you use your handguns for competition, hunting, informal target shooting, home defense or all of the above -- the Square Deal B is perfect. It's available in all popular handgun calibers and if you shoot more than one handgun caliber, you can change from one caliber to another in minutes with a Square Deal B caliber conversion kit

NOTE: Pictured with optional accessories: SDB Strong Mount, Low Powder Sensor and Bullet Tray.

RL 550B Reloader (Pistol Calibers)

* Accommodates Over 120 Calibers
* Interchangeable Toolhead Assembly
* Auto Powder/Priming Systems
* Uses Standard 7/8" x 14 Dies
* Loading Rate: 500-600 Rounds/Hour
* Lifetime "No-B.S." Warranty

More RL 550s have been sold than any other progressive machine in the world. And for good reason. The RL 550B's versatility is almost unlimited. It will load over 120 different rifle and pistol calibers. Its quick change toolhead allows the user to change calibers without having to readjust dies.

Used with Dillon three-die pistol sets, the RL 550B allows crimping to be done separately in the last station. This feature makes die adjustment easier and produces a more consistent and accurate round of ammunition. For this reason, more competition ammunition is loaded on Dillon progressives than on all other loading machines combined.

NOTE: Dies sets sold separately. Shown with the following optional accessories: Low Powder Sensor, Plastic Roller Handle, Strong Mount and Bullet Tray XL

XL 650 Reloader with Conversion (Pistol Calibers)

* Automatic Indexing
* Five-Station Interchangeable Toolhead
* Auto Powder / Priming Systems
* Uses Standard 7/8" x 14 Dies
* Loading Rate: 800-1000 Rounds per Hour
* Lifetime "No-B.S." Warranty

We've been listening to customers express their fondest wishes for years and the XL 650 is the result. We've taken every good idea we or our customers ever had, tested them extensively and then incorporated them into the design of the XL 650.

Versatility was a design objective, so the XL 650 lets the user load virtually every popular pistol and rifle cartridge utilizing standard dies. The optional powder charge check die on the third station sounds an alarm if the powder charge in a round is out of limits either high or low. An exclusive new primer system design uses a rotary indexing plate that positively controls each primer and keeps a steel shield between the primers and the operator at all times.

NOTE: Pictured with optional accessories: Electric Casefeeder, Powdercheck System, Low Powder Sensor, Roller Handle, Strong Mount and Bullet Tray.

RL SUPER 1050 Auto-indexing Reloader

Dillon Precision announces the arrival of the SUPER 1050!

The SUPER 1050 features a lengthened frame and a new crank assembly that provides increases functional stroke to accommodate long calibers, yet the handle stroke is at a minimum, meaning less work for the operator. The machine's new frame and crank assemblies have been improved to provide greater strength and smoother operation.

The SUPER 1050 is warranted for life from defects in materials or workmanship, plus a one-year, 100-percent warranty against normal wear.

Optional Accessories

#22051	Strong Mount	$59 $50
#16306	Low Powder Sensor	$59 $50
#22183	Plastic Roller Handle	$49 $43
#17950	Aluminum Roller Handle	$56 $48
#21073	Small pistol case feed plate	$53 $45

Case Gages

The ultimate test of any reloaded ammunition is whether or not it fits and functions in your gun. Dillon's Stainless Steel Case Gages enable you to "chamber check" your ammunition safely and easily.

Dillon Case Lube

Rapid Lube 5000, Dillon's aerosol cartridge case lubricant, has been replaced by an "environmentally correct," non-aerosol case lube. It works the same: Simply lay your cases out, spray lightly with one or two passes and you've done it. No mess, no guesswork. Within minutes the lubricant distributes itself around the cartridge cases and you're ready to load.

Rapid Polish 290

SHINE? You bet your brass! Dillon Precision has developed another exciting new product to make your reloading faster and easier. Rapid Polish 290 is the first cartridge case finish designed specifically to bring a brilliant shine (20 percent brighter than tumbling media alone) and a protective coating to reloaded ammunition.

Vibratory Case Cleaner

The only REAL complaint we've ever had about the CV-2001 is: "It's TOO big!" Many of our customers have asked us to come up with a smaller case cleaner, and we've been paying attention!

Dillon's new CV-500 Vibratory Case Cleaner is perfect for reloaders with limited space. Both pieces of equipment are Dillon-tough, using the same materials in construction and designed to work just as hard! NOTE: One-year warranty on the electric motor.

Media Separator

After we sold thousands of our famous first-generation FL-2000 case cleaners, customers who had purchased them began asking us to address the problem of separating the cleaned and polished brass from the cleaning media.

The solution was an injection molded reversible part. Simple, and it works great.

Kinetic Bullet Puller

Nobody's perfect. Our Bullet puller makes it easy to recover all your components.

Dillon's 'Eliminator' Scale

Magnetically dampened 511 grain capacity accurate to within +/- 0.1 grain.

D-Terminator Electronic Scale

* 900 grain/57 gram capacity
* Accurate to0.1 grain/0.01 gram
* Uses four AA batteries (included)
* Comes with its own AC adapter
* Scale check weight included

All the electrical/electronic components of Dillon equipment are covered by a one-year warranty from date of purchase.

Range Bag

Dillon's re-designed Modular Range Bag features a Molle-style fastener system to make it easy to reconfigure the bag to fit your individual needs. The end compartments are removable, and extra end compartments are available.

The Range Bag comes with a removable, open-topped Stage bag, so you can carry your ammo to shoot a stage without having to take the entire bag.The main compartment is designed to hold the Stage Bag (included) or the Border Shift Ammo Bag (sold separately),as well as a Dillon large Utility Box (sold separately).

Ammo Bag

Simple, just fill one compartment with your favorite loads and head for the range. As you shoot, put all your empties in the other compartment. When you're finished shooting all the empty brass is in one place, ready to be cleaned and reloaded.

Uncle Mike's Kydex Hip Holster

Michaels of Oregon's new injection-molded Kydex holster has a level of detailing, quality and affordability unmatched by other manufacturing methods.

The almost-vertical rake allows for behind-the-hip carry, and for some applications, the holster can function as a cross-draw. Smaller-size holsters can also be used for "appendix" carry.

To aid concealment and to assist in the draw, the holster rides close to the body at mid-level height.

The injection-molded belt loop is designed to properly accept and support a wide variety of belts from 1" to 1.75" wide.

I also sell top-of-the-line CRSpeed holsters.

Electronic Hearing Protectors

Dillon's HP1 Electronic Hearing Protector amplifies weak sounds while at the same time blocking out loud, harmful noise. During loud noises, the HP1 maintains a comfortable level of sound transmission.

HP1 hearing protectors are designed to never completely shut off.

Dillon HP1 Electronic Hearing Protectors have a one-year warranty.

Belt Clip

Headset Belt Clip. What more needs to be said?